Optimal Pricing Algorithm in the Electricity Market with Battery and Accumulator and Demand–Supply Balancing

This paper considers the day‐ahead market with batteries and accumulators to level power generation. First, we model consumers with batteries, generators with batteries, and accumulators, all of whom strive to maximize their own profit. An optimal pricing algorithm based on dual decomposition and the steepest descent method is derived and shown to be stable. Finally, the effectiveness of the algorithm is demonstrated by means of numerical simulations which indicate that it achieves demand–supply balance.     

基于双声表面波器件的引信加速度传感器

In view of the shortcomings of silicon micro acceleration sensor based on piezoresistive effect and capacitance principle, such as temperature drift, low resolution and poor anti-interference ability, a fuze acceleration sensor based on dual SAW devices is proposed. The sensor adopts a dual saw device structure, one is coated with a sensitive film for measurement, the other is an uncoat- ed reference channel for compensation of environmental temperature, pressure, humidity and other factors. The experimental results show that the maximum linear error is only 1.6%, the sensitivity is 54.3Hz/g, and the maximum hysteresis error is less than 1%. Compared with piezoresistive accelerometer and capacitive accelerometer, the linear error of the accelerometer is small, the sensitivi- ty is high, and it has strong anti-interference ability.     

Effect of multi pulse current treatment on microstructure and microhardness of resistance spot welded dual phase steel DP590

In this paper, microhardness and microstructural characteristics of dual phase DP590 steel resistance spot weld joint under two different welding conditions (i. e. single pulse and multi pulse) were studied. It was observed that applying multi pulse currents resulted in quasi-equiaxed grains of tempered martensite in fusion zone (FZ) of the weldment. The refinement of microstructure in fusion zone using multi pulse current treatment resulted in reduced hardness of the weld joint.     

Bark as feedstock for dual fluidized bed gasifiers—Operability,efficiency, and economics

The demand for biofuels and biochemicals is expected to increase in the future, which will in turn increase the demand for biomass feedstock. Large gasification plants fueled with biomass feedstock are likely to be a key enabling technology in a resource‐efficient, bio‐based economy. Furthermore, the costs for producing biofuels and biochemicals in such plants could potentially be decreased by utilizing inexpensive low‐grade residual biomass as feedstock. This study investigates the usage of shredded tree bark as a feedstock for the production of biomethane in the GoBiGas demonstration plant in Gothenburg, Sweden, based on a 32 MW_th industrial dual fluidized bed gasification unit. The plant was operated with bark feedstock for 12 000 hours during the period 2014 to 2018. Data from the measurement campaign were processed using a stochastic approach to establish the plant's mass and energy balances, which were then compared with operation of the plant with wood pellets. For this comparison, an extrapolation algorithm was developed to predict plant performance using bark dried to the same moisture content as wood pellets, ie, 8%_w.b. Plant operation with bark feedstock was evaluated for operability, efficiency, and feedstock‐related cost. The gas quality achieved during the test period was similar to that obtained for operation with wood pellets. Furthermore, no significant ash sintering or agglomeration problems were observed more than 750 hours of operation. The calculated biomass‐to‐biomethane efficiency is 43% to 47% (lower heating value basis) for operation with wet bark. However, the predicted biomass‐to‐biomethane efficiency can be increased to 55%–65% for operation with bark feedstock dried to 8% moisture content, with corresponding feedstock costs in the range of 24.2 to 32.7 EUR/MWh; ie, a cost reduction of about 40% compared with wood pellets.     

“流空间”视角下的城市空间网络结构研究——以成渝双城经济圈为例

推动区域协调发展已经成为构建高质量发展国土空间布局的客观需要和解决发展不平衡问题的内在需求，以城市群为核心的经济圈建设成为驱动高质量发展的重要空间层级。为实现成渝双城经济圈的区域一体化及区域多层级协调发展，将流动的生产资源与城市空间结构相结合，基于人流、信息流、技术流、经济流四大流动资源，采用社会网络分析方法，分别从点、线、面3个维度对成渝双城经济圈空间网络结构特征进行分析。研究表明：经济圈内部呈现以成都、重庆为双核心的结构，区域间相互作用，城市中心性整体表现出内部优于外部的空间特征，核心城市对外围城市未充分发挥带动作用；圈内城市链接多表现出高度不对称性，链接对称地区主要集中在成渝中轴地区，城市间的联系有待加强，经济圈外围城市与外界联系较少；区域内部小团体现象明显，团体间联系密度存在差异，整体来看城市集群格局尚未形成，跨省域、跨地区的联系不够，成渝双城经济圈主要是西侧地区围绕成都发展。最后，为构建成渝经济圈一体化及区域多层级协调发展的空间格局，建议突破行政区域限制，构建多领域的跨区域共享协作通道；加强中部地区发展动力，提高外围城市的资源吸收能力；注重经济圈内城市交通建设及信息融合发展，突出核心城市的引领作用和外溢属性，促进城市间技术交流与经济融合。     

变压器磁铁固定座全自动级进式精密注塑模设计

根据变压器磁铁固定座结构特点,用辅助料带将金属端子串联在一起,再通过气缸和双推板脱模机构,使注塑模具能够像冲压模具那样可以进行全自动级进式进料和脱模。同时模具采用浮动式侧向抽芯机构,巧妙地解决了料带定位镶件和滑块相互干涉的问题。模具结构先进合理、快速高效,塑件尺寸精度得到了大幅提高。     

双波长叠加紫外光度法测定SDBS

研究了硫酸耐尔蓝与十二烷基苯磺酸钠(SDBS)的反应,建立测定SDBS的双波长叠加紫外光度法。在pH=5.02缓冲溶液中,硫酸耐尔蓝与SDBS形成离子缔合物,在紫外区有正、负吸收峰,大正吸收波长位于304 nm,大负吸收波长位于280 nm,摩尔吸光系数分别为ε280为2.5×104L·mol-1·cm-1,ε304为2.2×104L·mol-1·cm-1,当用双波长叠加法时,ε280+304为4.7×104L·mol-1·cm-1,线性范围均为0.5~4 mg/L。研究了反应的适宜条件,用于环境水中SDBS的测定,回收率在98.9%~103.2%。     

PLC在切换备用电气设备中的应用

介绍了基于PLC控制的聚合釜搅拌备用变频器自动切换方案的反应情况。